1962 Chevy C10 Hydrotuned
Hydrotunes designed and installed a custom audio upgrade in the 62 Cheverolet C10. This classic truck had been fully rebuilt, but came to us with no stereo at all. To modernize the setup without affecting the classic look of the vehicle, we chose not to install a traditional headunit, instead going with a custom-built plate in the dash to house a volume knob, an on/off power switch for the stereo, and a USB charging input for phones, iDevices, etc. There is a hideaway Bluetooth module that’s the only audio source for the system, controlled by the master volume knob, and feeding an Arc Audio XDi 4-channel amplifier installed under the bench seat. The Arc amp powers Morel Hifi Tempo 6.5” coax speakers in custom-built fiberglass kick panel enclosures, and a JL Audio 8” W3 sub behind the bench seat, also in a custom-built enclosure. A simple, clean system with a ton of output from very little gear, without compromising the cosmetics of the classic interior. For security we added an Audiovox 2-way paging alarm system with door trigger, shock sensor, hood pin, and siren.
Custom Auto Audio & Security Installation:
hHIDEWAY BLUETOOTH MODULE
POWERED VOLUME CONTROL KNOB
USB CHARGING PORT
ARC AUDIO XDI V2 4CH AMPLIFIER
MOREL TEMPO 6.5″ COAX SPEAKERS IN CUSTOM KICK PANELS
JL AUDIO 8W3 SUBWOOFER IN CUSTOM ENCLOSURE
2-WAY SECURITY SYSTEM
Hydrotunes team of custom marine audio, video, LED, and n
avigation systems installers are the most talented and professional in Austin and around the country. Our clients enjoy the attention to detail and unique solutions provided by our team. When your vision for your boat or watercraft has reached beyond swapping out the receiver, contact Hydrotunes and let our team of audio system designers and professional installers exceed your expectations.